A low profile compact three-way Wilkinson power divider with size reduction

[1]Ö. Kasar, M. Kahriman, and M. A. Gozel, “Application of ultra wideband RF energy harvesting by using multisection Wilkinson power combiner,” International Journal of RF and Microwave ComputerAided Engineering, vol. 29, no. 1, pp. 1-8, 2019.10.1002/mmce.21600Search in Google Scholar

[2] Y. Wu, Y. Liu, Q. Xue, S. Li, and C. Yu, “Analytical design method of multiway dual-band planar power dividers with arbitrary power division,” IEEE Transactions on Microwave Theory Techniques, vol. 58, no. 12, pp. 3832-3841, 2010.10.1109/TMTT.2010.2086712Search in Google Scholar

[3] M. Pozar, Microwave Engineering, 3rd ed. New York, USA: Wiley, 2006.Search in Google Scholar

[4] K. M. Cheng and C. Law, “A novel approach to the design and implementation of dual-band power divider,” (in English), IEEE Trans. Microw. Theory Tech., Article vol. 56, no. 2, pp. 487-492, Feb 2008, doi: 10. 1109/tmtt. 2007. 914629.10.1109/TMTT.2007.914629Search in Google Scholar

[5] J. Kim and Y. Lee, “A Z-Transform Method for Synthesis of Unequal-Length Multisection Transmission Lines for Multiband Applications,” IEEE Transactions on Microwave Theory and Techniques, vol. 65, no. 9, pp. 3200-3210, 2017.10.1109/TMTT.2017.2678474Search in Google Scholar

[6] S. Kumar and M. Kumar, “Ultra wide band Wilkinson equal power divider using rectangular rings of different impedance,”, International Conference on Medical Imaging, m-Health and Emerging Communication Systems (MedCom), 2014, pp. 49-57.10.1109/MedCom.2014.7005974Search in Google Scholar

[7] A. Belen, P. Mahouti, F. GNE, and H. Partal, “Design and Implementation of Doppler Microwave Motion Sensor for Indoor Application,” Sigma Journal of Engineering and Natural Sciences, vol. 36, no. 3, pp. 849-859, 2018.Search in Google Scholar

[8]Ö. Kasar, M. Kahriman, and M. A. Gözel, “A New Multi Stepped Real Impedance Matching Method with Euler Polynomials and its Application on Transmission Line,” Journal of Engineering Sciences and Design, vol. 5, no. 3, pp. 547-552, 2017.10.21923/jesd.325827Search in Google Scholar

[9] S. Gao, S. Sun, and S. Xiao, “A novel wideband bandpass power divider with harmonic-suppressed ring resonator,” IEEE Microwave Wireless Components Letters, vol. 23, no. 3, pp. 119-121, 2013.10.1109/LMWC.2013.2244873Search in Google Scholar

[10] D. Hawatmeh, K. Al Shamaileh, N. Dib, and A. Sheta, “Design and analysis of a 3-way unequal split ultra-wideband Wilkinson power divider,” International Journal of Electronics, vol. 100, no. 8, pp. 1062-1071, 2013.10.1080/00207217.2012.731373Search in Google Scholar

[11] Y.-A. Lai, C.-M. Lin, J.-C. Chiu, C.-H. Lin, and Y.-H. Wang, “A compact Ka-band planar three-way power divider,” IEEE Microwave Wireless Components Letters, vol. 17, no. 12, pp. 840-842, 2007.10.1109/LMWC.2007.910476Search in Google Scholar

[12] H. Oraizi and A. Yousefi, “Optimum design of a wideband planar N-way fork power divider with arbitrary power division and input-to-output impedance matching,” AEU-International Journal of Electronics Communications, vol. 79, pp. 83-93, 2017.10.1016/j.aeue.2017.05.038Search in Google Scholar

[13] C. Zhu, J. Xu, W. Kang, and W. Wu, “Microstrip multifunctional reconfigurable wideband filtering power divider with tunable center frequency, bandwidth, and power division,” IEEE Transactions on Microwave Theory Techniques, vol. 66, no. 6, pp. 2800-2813, 2018.10.1109/TMTT.2018.2811799Search in Google Scholar

[14] C. Zhu and J. Zhang, “Design of High-Selectivity Asymmetric Three-Way Equal Wideband Filtering Power Divider,” IEEE Access, vol. 7, pp. 55329-55335, 2019.10.1109/ACCESS.2019.2913314Search in Google Scholar

[15] L. Wang et al, “An on-Chip Planar Broadband 3-Way Power Divider for Josephson Voltage Circuits,” IEEE Transactions on Applied Superconductivity, vol. 31, no. 1, pp. 1-4, 2020.10.1109/TASC.2020.3014406Search in Google Scholar

[16] H. Eghlidi, K. Mehrany, and B. Rashidian, “Analytical approach for analysis of nonuniform lossy/lossless transmission lines and tapered microstrips,” IEEE Transactions on Microwave Theory and Techniques, vol. 54, no. 12, pp. 4122-4129, 2006.10.1109/TMTT.2006.885565Search in Google Scholar

[17] D. Hawatmeh, N. Dib, and K. Alshamaileh, “Microstrip Non-uniform Transmission Lines Triple Band 3-way Unequal Split Wilkinson Power Divider,” Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 62, no. 3, pp. 288-293, 2017.Search in Google Scholar

[18] X. Wang, I. Sakagami, A. Mase, and M. Ichimura, “Trantanella Wilkinson power divider with additional transmission lines for simple layout,” IET Microwaves, Antennas & Propagation, vol. 8, no. 9, pp. 666-672, 2014.10.1049/iet-map.2013.0454Search in Google Scholar

[19] Y.-H. Pang and Z.-H. Li, “Dual-band bandpass Wilkinson power divider of controllable bandwidths,” Electronics Letters, vol. 52, no. 7, pp. 537-539, 2016.10.1049/el.2015.3645Search in Google Scholar

[20] V. Tas and A. Atalar, “An optimized isolation network for the Wilkinson divider,” IEEE Trans. Microw. Theory Tech, vol. 62, no. 12, pp. 3393-3402, 2014.10.1109/TMTT.2014.2365533Search in Google Scholar

[21] H. Chen, Y. Zhou, T. Zhang, W. Che, and Q. Xue, “ N-Way Gysel Power Divider With Arbitrary Power-Dividing Ratio,” IEEE Trans. Microw. Theory Tech., vol. 67, no. 2, pp. 659-669, 2018.10.1109/TMTT.2018.2883049Search in Google Scholar

[22] P. Mahouti, M. A. Belen, H. P. Partal, S. Demirel, and F. Gúnes, “Miniaturization with dumbbell shaped defected ground structure for power divider designs using Sonnet,” in 2015 31st International Review of Progress in Applied Computational Electromagnetics (ACES), 2015: IEEE, pp. 1-2.Search in Google Scholar

[23] P. Singh, S. Basu, and Y.-H. Wang, “Coupled line power divider with compact size and bandpass response,” Electronics letters, vol. 45, no. 17, pp. 892-894, 2009.10.1049/el.2009.1488Search in Google Scholar