[1. CIMAC, “Guidelines for the lubrication of medium speed diesel engines,” Int. Counc. Combust. Engines, no. 29, 2008.]Search in Google Scholar
[2. P.G. Casale, D. Davidson, and G. Lane, “Marine lubrication and the user connection,” in 20th International Congress on Combustion Engines, CIMAC, London, 1993.]Search in Google Scholar
[3. W. Cyulin and W.J. Lemski, “Effect of operating influences on wearing speed of marine diesel engine elements,” in II International Scientifically-Technical Conference EXPLO-Diesel & Gas Turbine. Gdańsk-Międzyzdroje-Kopenhaga, 2001.]Search in Google Scholar
[4. J.F. Thomas, C. Scott Sluder, M.D. Kass and T. Theiss, “A guide to fuel, lubricant, and engine concerns relative to the IMO 2020 Fuel Oil Sulfur Reduction Mandate,” Oak Ridge National Laboratory, 2019.]Search in Google Scholar
[5. V. Macian, B. Tormos, P. Olmeda, and L. Montoro, “Analytical approach to wear rate determination for internal combustion engine condition monitoring based on oil analysis,” Tribology International, vol. 36, 2003.10.1016/S0301-679X(03)00060-4]Search in Google Scholar
[6. J. Senatorski, “Assessment of the impact of mineral abrasive particles on the wear of lubricated sliding associations” (in Polish), Tribologia, no. 2, 2002.]Search in Google Scholar
[7. J.K. Włodarski, “Fundamentals of operation of marine machinery: Friction and wear” (in Polish), Wydawnictwo Akademii Morskiej w Gdyni, Gdynia 2006.]Search in Google Scholar
[8. P. Tonon, et al., “Tribology in a big medium speed engine”, Paper No. 105, presented at the 24th CIMAC Congress, Kyoto 2004.]Search in Google Scholar
[9. IMO Annex 14, Resolution MEPC.320(74) (adopted 17 May 2019), “2019 Guidelines for Consistent Implementation of the 0.50% Sulphur Limit Under Marpol Annex VI.” [Online]. Available: https://wwwcdn.imo.org/localresources/en/KnowledgeCentre/IndexofIMOResolutions/MEPCDocuments/MEPC.320(74).pdf. [Accessed April 2, 2021].]Search in Google Scholar
[10. R. Bergqvist, M. Turesson, and A. Weddmark, “Sulphur emission control areas and transport strategies – The case of Sweden and the forest industry,” Eur. Transp. Res. Rev., vol. 7, no. 2, 2015. doi: 10.1007/s12544-015-0161-9.]Open DOISearch in Google Scholar
[11. EMSA, “The 0.1 % sulphur in fuel requirement as from 1 January 2015 in SECAs – An assessment of available impact studies and alternativemeans of compliance,” European Maritime Safety Agency, Technical Report, 13 December 2010.]Search in Google Scholar
[12. A. Halff, L. Younes, and T. Boersma, “The likely implications of the new IMO standards on the shipping industry,” Energy Policy, vol. 126, 2019. doi: 10.1016/j.enpol.2018.11.033.]Open DOISearch in Google Scholar
[13. EC, “Directive 2012/33/EU of the European Parliament and of the Council of 21 November 2012 amending Council Directive 1999/32/EC as regards the sulphur content of marine fuels,” OJL, 2012.]Search in Google Scholar
[14. M. Guatam, K. Chitor, M. Durbha, and J.C. Sommers, “Effect of diesel soot contaminated oil on engine wear-investigation of novel oil formulation,” Tribology International, vol. 32, 1999.10.1016/S0301-679X(99)00081-X]Search in Google Scholar
[15. J.J. Corbett, J.J. Winebrake, E.H. Green, P. Kasibhatla, V. Eyring, and A. Lauer, “Mortality from ship emissions: A global assessment,” Environmental Science & Technology, vol.–41, no. 24, pp. 8512–8518, 2007. doi: 10.1021/es071686z.18200887]Open DOISearch in Google Scholar
[16. R. Szłapczyński and H. Ghaemi, “Framework of an evolutionary multi-objective optimization method for planning a safe trajectory for a marine autonomous surface ship,” Polish Maritime Research, 2020. doi: 10.2478/pomr-2019-0068.]Open DOISearch in Google Scholar
[17. E. Sobecka, R. Szłapczynski, and M. Zyczkowski, “Evolutionary multi-objective weather routing of sailboats,” Polish Maritime Research, 2020. doi: 10.2478/pomr-2020-0054.]Open DOISearch in Google Scholar
[18. A. Cheaitou and P. Cariou, “Greening of maritime transportation: A multi-objective optimization approach,” Ann. Oper. Res., 2019. doi: 10.1007/s10479-018-2786-2.]Open DOISearch in Google Scholar
[19. Z. Baoji, “Research on ship hull optimization of high-speed ship based on viscous flow/potential flow theory”, Polish Maritime Research, 2020. doi: 10.2478/pomr-2020-0002.]Open DOISearch in Google Scholar
[20. S. Su, Y. Zheng, J. Xu, and T. Wang, “Cabin placement layout optimization based on systematic layout planning and genetic algorithm,” Polish Maritime Research, 2020. doi: 10.2478/pomr-2020-0017.]Open DOISearch in Google Scholar
[21. K. Rudzki and W. Tarelko, “A decision-making system supporting selection of commanded outputs for a ship’s propulsion system with a controllable pitch propeller,” Ocean Eng., 2016. doi: 10.1016/j.oceaneng.2016.09.018.]Open DOISearch in Google Scholar
[22. W. Tarelko and K. Rudzki, “Applying artificial neural networks for modelling ship speed and fuel consumption,” Neural Computing and Applications, 2020. doi: 10.1007/s00521-020-05111-2.]Open DOISearch in Google Scholar
[23. W. Stadler, Multicriteria Optimization in Engineering and in the Sciences. Boston, MA: Springer US, 1988.10.1007/978-1-4899-3734-6]Search in Google Scholar
[24. A. Młynarczak, “Optimisation of the using process of lubricating oils in marine engines” (in Polish), PhD dissertation, Gdynia Maritime University, Gdynia 2006.]Search in Google Scholar
[25. A. Młynarczak, “Modelling of alkalinity changes in lubricating oils used in marine diesel engines”, J. KONES, vol. 16, no. 2, 2009.]Search in Google Scholar
[26. A. Młynarczak, “Modeling of mass concentration of solid impurities changes in Lubricating oils used in trunkpiston marine diesel engines during various lubricating oil refilling methods”, Joint Preceedings no. 21, August 2008, Gdynia Maritime University & Hochshule Bremerhaven, pp. 29–36, Wydawnictwo Uczelniane AM Gdynia 2008.]Search in Google Scholar