[
[1] Hajdu, F., Kuti, R. “Examination of chaotic vibrations during operation of a fire truck”, in Proceedings of MAC 2018 in Prague Prag, Czech Rebuplic 25-27 May 2018, pp. 163 – 170, 2018.
]Search in Google Scholar
[
[2] Fakhraei, J., Khanlo, H. M., Ghayour, M. “Chaotic behaviors of a ground vehicle oscillating system with passengers”, Scientia Iranica 24 (3), pp. 1051 – 1068, 2017. DOI: 10.24200/sci.2017.4088
]Open DOISearch in Google Scholar
[
[3] Marzbanrad, J., Keshavarzi, A. “Chaotic Vibrations of a Nonlinear air Suspension System under Consecutive Half Sine Speed Bump”, Indian Journal of Science & Technology 8 (3), 2015. DOI: 10.17485/ijst/2015/v8iS3/52684
]Open DOISearch in Google Scholar
[
[4] Patricio, P. S. “Effects of Frame Design and Cab Suspension on the Ride Quality of Heavy Trucks”, Master thesis, Virginia Polytechnic Institute and State University, 2002. [online] Available at: https://vtechworks.lib.vt.edu/bitstream/handle/10919/34865/thesis4b.pdf?sequence=1&isAllowed=y [Accessed: 20.04.2022.]
]Search in Google Scholar
[
[5] Sendur, P., Kurtdere, A., Akalyar, O. “A methodology to improve streering wheel vibration of a heavy commercial truck”, SAE Technical Paper 2013-01-2351, 2013. DOI: 10.4271/2013-01-2351
]Open DOISearch in Google Scholar
[
[6] Lu, Y., Li, S., Chen, N. “Research on Damping Characteristics of Shock Absorber for Heavy Vehicle”, Research Journal of Applied Sciences, Engineering and Technology 5(3), pp. 842 – 847, 2013. DOI: 10.19026/rjaset.5.5030
]Open DOISearch in Google Scholar
[
[7] Yenerer, H., Stan, A. C., Sendur, P., Basdogan, I. “Vibro-Acoustic Analysis of a Heavy Duty Truck Cabin”, in Proceedings of the 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, Copenhagen, Denmark, 25-27. June, 2014. DOI: 10.1115/ESDA2014-20559
]Open DOISearch in Google Scholar
[
[8] Gagliardi, J. C., Utt, W. K. “Vibration Environmental Testing for Large Haulage Trucks”, Report of investigations (United States. Bureau of Mines), 9483, 1993. [online] Available at: https://stacks.cdc.gov/view/cdc/10278, [Accessed: 05.04.2022.].
]Search in Google Scholar
[
[9] Li, S., Lu, Y., Li, L. “Dynamical Test and Modeling for Hydraulic Shock Absorber on Heavy Vehicle under Harmonic and Random Loadings”, Research Journal of Applied Sciences, Engineering and Technology 4(13), pp. 1903 – 1910, 2012. [online] Available at: https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.470.206&rep=rep1&type=pdf, [Accessed: 05.05.2022.]
]Search in Google Scholar
[
[10] Szauter, F. “Dynamic Modeling, Identification and Vibration Analysis of Road Vehicles” (in Hungarian), PhD. thesis, Széchenyi István University, 2017. [online] Available at: https://mmtdi.sze.hu/downloadmanager/download/nohtml/1/id/29196/m/1584, [Accessed: 02.04.2022]
]Search in Google Scholar
[
[11] Szauter, F., Istenes, G., Rödönyi, G. “AR and ARMA Spectral Analysis of Suspension System of a Commercial City Bus”, IEEE 14th International Symposium on Computational Intelligence and Informatics. CINTI, Budapest, Hungary, 17-19 Nov. 2016. Paper No. 16666841. DOI: 10.1109/CINTI.2016.7846395
]Open DOISearch in Google Scholar
[
[12] Zhao, L., Zhou, C., Yu, Y., Yang, F. “A method to evaluate stiffness and damping parameters of cabin suspension system for heavy truck”, Advances in Mechanical Engineering, 2016. DOI: 10.1177/1687814016654429
]Open DOISearch in Google Scholar
[
[13] Alvarez-Sanchez, E. “A quarter-car suspension system: car body mass estimator and sliding mode control”, Procedia Technology 7, pp. 208 – 214, 2013. DOI: 10.1016/j.protcy.2013.04.026
]Open DOISearch in Google Scholar
[
[14] Schiffer, A., Ivanyi, A. “Two-dimensional vector hysteresis model”, Pollack Periodica 1 (2), pp. 83 – 97, 2006. DOI: 10.1556/Pollack.1.2006.2.7
]Open DOISearch in Google Scholar
[
[15] Pop, N., Ovidiu, C., “Algorithm to describe magnetization curves by using Jiles Atherton model”, Pollack Periodica 5(2) pp. 155 – 165, 2010. DOI: 10.1556/pollack.5.2010.3.13
]Open DOISearch in Google Scholar
[
[16] Csurcsia, P. “Static nonlinearity handling using best linear approximation: An introduction”, Pollack Periodica 8(1), pp. 153 – 165, 2013. DOI: 10.1556/pollack.8.2013.1.14
]Open DOISearch in Google Scholar
[
[17] Magdolen, L., Danko, J., Milesich, T., Nemec, T., Sloboda, K., Bucha, J. “Dual Mass Flywheel Parameter Identification”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 167 – 178, 2021. DOI: 10.2478/scjme-2021-0027
]Open DOISearch in Google Scholar
[
[18] Shi, W. K., Liu, C., Chen, Z. Y., He, W., Zu, Q. H. “Efficient method for calculating the composite stiffness of parabolic leaf springs with variable stiffness for vehicle rear suspension”, Mathematical Problems in Engineering 2016, Paper ID 5169018, pp. 1 ‒ 12, 2016. DOI: 10.1155/2016/5169018
]Open DOISearch in Google Scholar
[
[19] Likaj, R., Shala, A. “Optimisation and Control of Vehicle Suspension Using Linear Quadratic Gaussian Control”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 61 – 68, 2018. DOI: 10.2478/scjme-2018-0006
]Open DOISearch in Google Scholar
[
[20] Jiao, L. “Vehicle model for tyre-ground contact force evaluation”, Master thesis, KTH Royal Institute of Technology, 2013. [online] Available at: https://www.diva-portal.org/smash/get/diva2:872185/FULLTEXT01.pdf, [Accessed: 05.05.2022.]
]Search in Google Scholar
