<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The present experimental investigation aims to analyse the effect of various machining parameters, such as pulse peak current (Ion), pulse on time (Ton), pulse off time (Toff) and spark voltage (SV) on the surface roughness (SR) and material removal rate(MRR) by using continuous traveling of both wire electrode (i.e. brass wire and zinc-coated brass wire). The present work also analyses the effect of types of wires, such as brass wire and zinc-coated brass wire used during machining of Titanium alloy (Ti-6Al-4V) on Surface roughness (SR) and material removal rate (MRR). This work studies the correlation between various response parameter such SR and MRR by using same machining parameter by for both wires.</p>
</abstract>

The present experimental investigation aims to analyse the effect of various machining parameters, such as pulse peak current (Ion), pulse on time (Ton), pulse off time (Toff) and spark voltage (SV) on the surface roughness (SR) and material removal rate(MRR) by using continuous traveling of both wire electrode (i.e. brass wire and zinc-coated brass wire). The present work also analyses the effect of types of wires, such as brass wire and zinc-coated brass wire used during machining of Titanium alloy (Ti-6Al-4V) on Surface roughness (SR) and material removal rate (MRR). This work studies the correlation between various response parameter such SR and MRR by using same machining parameter by for both wires.

Effect of different wire materials on WEDM performance of Bio-compatible material

Production Engineering Archives

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

The present experimental investigation aims to analyse the effect of various machining parameters, such as pulse peak current (Ion), pulse on time (Ton), pulse...

Effect of different wire materials on WEDM performance of Bio-compatible material

Published Online: Feb 12, 2022

Page range: 50 - 55

Received: Aug 06, 2021

Accepted: Nov 22, 2021

DOI: https://doi.org/10.30657/pea.2022.28.06

Keywords
WEDM, MRR, SR, Ti-6Al-4V

© 2022 Gaurav Kumar Pandey et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Effect of different wire materials on WEDM performance of Bio-compatible material

Published Online: Feb 12, 2022

Page range: 50 - 55

Received: Aug 06, 2021

Accepted: Nov 22, 2021

DOI: https://doi.org/10.30657/pea.2022.28.06

KeywordsWEDM, MRR, SR, Ti-6Al-4V

© 2022 Gaurav Kumar Pandey et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Keywords
WEDM, MRR, SR, Ti-6Al-4V