A Review on Suspended Wood Dust Combustion. Efficiency and Fuel Quality

1. Molcan, P., Lu, G., Bris, T. et. al. Characterization of biomass and coal co-firing on a 33 MWth Combustion Test Facility using flame imaging and gas/ash sampling techniques. Fuel, 2009, vol. 88, p. 2328-2334.10.1016/j.fuel.2009.06.027Search in Google Scholar

2. Sarenbo, S. Wood ash dilemma-reduced quality due to poor combustion performance. Biomass & Bioenergy, 2009, vol. 33, 1212-1220.10.1016/j.biombioe.2009.05.007Search in Google Scholar

3. Skrifvars, B-J., Lauren, T., Hupa, M. et. al. Ash behaviour in a pulverized wood fired boiler-a case study. Fuel, 2004, vol. 83, p. 1371-1379.10.1016/j.fuel.2004.01.008Search in Google Scholar

4. Sovalainen, K. Co-firing of biomass in coal-fired utility boilers. AppliedEnergy, 2003, vol. 74, p. 369-381.10.1016/S0306-2619(02)00193-9Search in Google Scholar

5. Nishiyama, A., Shimojima, H., Ishikawa, A., et. al. Fuel and emissions properties of Stirling engine operated with wood powder. Fuel 2007, vol. 86, p. 2333-2342.10.1016/j.fuel.2007.01.040Search in Google Scholar

6. Standard CEN/TS 14961 Solid biofuels - Fuel specifications and classesSearch in Google Scholar

7. Bioenerģijas tehnoloģijas, D. Blumberga, I Veidenbergs, F Romagnoli, C. Rochas, A. Žandeckis, Riga: Institute of energy Systems and Environment, 2011Search in Google Scholar

8. Handbook of Biomass combustion & Co-firing, S. van Loo, J. Koppejan, UK : Earthscan, 2008Search in Google Scholar

9. Williams, A., Jones J.M., Ma, L., et. al. Pollutants from the combustion of solid biomass fuels. Progress in Energy and Combustion Science, 2012, vol 381 113-137.10.1016/j.pecs.2011.10.001Search in Google Scholar

10. Janvijitsakul, K., Kuprianov, V. I. Major gaseous and PAH emissions form a fluidized-bed combustor firing rice husk with high combustion efficiency. Fuel processing technology, 2008, vol. 89, p 777-78710.1016/j.fuproc.2008.01.013Search in Google Scholar

11. Weber, R., Kupka, T., Zajac, K. Jet flames of refuse derived fuel. Combustion and Flame, 2009, vol 156, p. 922-92710.1016/j.combustflame.2008.12.011Search in Google Scholar

12. Casaca, C., Costa, M. Co-combustion of biomass in a natural gas-fired furnace. Combustion Science and Technology, 2010, vol 175, N 11, p. 1953-1977.10.1080/714923187Search in Google Scholar

13. Paulrud, S., Nillson, C. The effects of particle characteristics on emission from burning wood fuel powder. Fuel, 2004, vol. 83, p. 813-821.10.1016/j.fuel.2003.10.010Search in Google Scholar

14. Eriksson, G., Kjellström, B., Lundqvist, B. et. al. Combustion of wood hydrolysis residue in a 150 kW powder burner. Fuel, 2004, vol. 83, p. 1635-1641.10.1016/j.fuel.2004.02.012Search in Google Scholar

15. Ballester, J., Barroso, J., Cerecedo L. M. et. al. Comparative study of semi-industrial-scale flames of pulverized coals and biomass. Combustionand Flame, 2005, vol. 141, p. 204-215.10.1016/j.combustflame.2005.01.005Search in Google Scholar

16. Lin, W., Jensen., P. A., Jensen, A. D. Biomass Suspension Combustion: Effect of Two-Stage Combustion on NOx Emissions in a Laboratory- Scale Swirl Burner. Energy & Fuels, 2009, vol. 23, p. 1398-1405.10.1021/ef8004866Search in Google Scholar

17. Kupka, T., Mancini, M., Irmer, M., Weber, R. Investigation of ash deposit formation during co-firing of coal with sewage sludge, saw-dust and refuse derived fuel. Fuel, 2008, vol. 87, p. 2824-2837.10.1016/j.fuel.2008.01.024Search in Google Scholar

18. T., Costen, P., Kandamby, N. H. et. al. The influence of burner injection mode on pulverized coal and biosolid co-fired flames. Combustion andFlame, 1994, vol. 99, p. 617-625.10.1016/0010-2180(94)90055-8Search in Google Scholar

19. Mehrabian, R., Zahirovic, S., Scharler, R. et. al. A CFD model for thermal conversion of thermally thick biomass particles. Fuel ProcessingTechnology, 2012, vol. 95, p. 96-108.10.1016/j.fuproc.2011.11.021Search in Google Scholar

20. Paulrud, S., Mattsson, J. E., Nilsson C. Particle and handling characteristics of wood fuel powder: effects of different mills. Fuelprocessing technology, 2002, vol. 76, p. 23-29.10.1016/S0378-3820(02)00008-5Search in Google Scholar

21. Hong, L., Ip, E., Scott, J. et. al. Effects of particle shape and size on devolatilization of biomass particle. Fuel, 2010, vol. 89, 1156-1168.10.1016/j.fuel.2008.10.023Search in Google Scholar

22. Demibras, A. Combustion characteristics of different biomass fuels. Progress in Energy and Combustion Science, 2004, vol. 30, p. 219-230.10.1016/j.pecs.2003.10.004Search in Google Scholar

23. Palm, R., Grundmann, S., Weismüller, M. et. al. Experimental characterization and modelling of inflow conditions for a gas turbine swirl combustor. International Journal of Heat and Fluid Flow, 2006, vol. 27, p. 924-936.10.1016/j.ijheatfluidflow.2006.03.016Search in Google Scholar

24. Syred N., A review of oscillation mechanisms and the role of the precessing vortex core (PVC) in swirl combustion systems. Progress inEnergy and Combustion Science, 2006, vol. 32, p. 93-161.10.1016/j.pecs.2005.10.002Search in Google Scholar

25. Khanna V. K. A Study of the Dynamics of Laminar and Turbulent Fullyand Partially Premixed Flames, PHD thesis, Virginia Polytechnic Institute and State University, 2001, p. 239.Search in Google Scholar

26. Spliethoff, H., Power generation from Solid Fuels. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010, p. 67210.1007/978-3-642-02856-4Search in Google Scholar

27. Sami, M., Annamalai, K., Wooldridge, M. Co-firing of coal and biomass fuel blends. Progress in Energy and Combustion Science, 2001, vol. 27, p. 171-214.10.1016/S0360-1285(00)00020-4Search in Google Scholar